Sample Product P8/P108, Model P8/P108 Differential or Absolute Pressure Transducer On Tavis Corp.

Pressure Transducers
for Manned & Unmanned
Launch Vehicles Pressure Transducers
for Aircraft / UAV Pressure Transducers
for Satellite Propulsion Pressure Transducers
for Interplanetary
Exploration Pressure Transducers
for Manned Spacecraft Pressure Transducers
for Submarine /
Military Vehicle Pressure Transmitters
for Submersible /
Liquid Storage Industrial / Power
Pressure Transmitters Standard / Non-Custom
Pressure Transducers


All Categories > Standard / Non-Custom Transducers > Sample Product P8/P108

Model P8/P108 Differential or Absolute Pressure Transducer

larger image

Sample Product P8/P108, Model P8/P108 Differential or Absolute Pressure Transducer

The Tavis Model P8 transducer is ideally suited to applications requiring very low differential pressure measurements. Available in pressure ranges as low as 0.01 psid, this differential pressure transducer features low power consumption and zero and full scale adjustments. The all welded stainless steel construction and a stable electronics package combine to produce an extremely accurate, but rugged unit.

All Tavis transducers can be supplied for corrosive media applications. Materials used for this purpose are 17-4 PH SS, 17-7 PH SS and Iconel . Specify model P108 for this feature.
Closer tolerances and higher temperature operation may be supplied. Consult factory for special requirements.
This unit is also available in a two wire 4 to 20 mA configuration. Add C following model number for this feature.

General Specifications · Electrical · Performance · Environmental · Features

General Specifications

Pressure Range		0 to 0.01 psi through 0 to 350 psi

Proof Pressure		20 psi or 200% F.S. (Higher proof pressures available. Consult factory)

Line Pressure		20 psia or 200% F.S. (Higher line pressures available. Consult factory)

Sensor Type		Variable Reluctance

Media		Liquids or gases compatible with 410 SS, 17-4 PH SS and Iconel

Electrical

Input Voltage		20 to 40 VDC

Max. Input Current		10 mA

Output Voltage		0 to 5 VDC

Max. Output Impedance		100 ohm

Max. Output Noise		15 mv P-P

Insulation Resistance		100 megohms min. at 100 VDC

Isolation Resistance		100 megohms min. at 100 VDC

Performance

Max. Static Error Band		± 0.5% F.S. (2)

Hysteresis		± 0.1% F.S. nom.

Repeatability		± 0.1% F.S. nom.

Max. Temperature Error		± 2.0% F.S. (2)

Frequency Response		Flat ±5% to 250 Hz

Max. Regulation		0.05% F.S. per volt

Resolution		Infinite

Environmental

Temperature Range		Compensated: -65ºF to +165ºF (2) Operating: -65ºF to +200ºF

Vibration		20 g s Peak to 2000 Hz

Shock		100 g s, 11 ms

Humidity, Altitude, Rain, Fungus, Salt Spray, Sand and Dust		Unaffected